2017 Good Quality Defoamer OF-02A Defoamer for Oil-Gas/Water Separation to Azerbaijan Importers

2017 Good Quality
 Defoamer OF-02A Defoamer for Oil-Gas/Water Separation to Azerbaijan Importers

Short Description:

SIXIN® DEFOAMER OF-02A    FEATURES ● SIXIN® OF-02A is composed of modified polysiloxane. ● Good stability. ● High efficient foam-suppressing performance. ● Good compatibility with petroleum solvent, can be diluted with solvents(such as    kerosene, dimethylbenzene ).   TYPICAL PROPERTIES Index Property Testing method Appearance  Colorless or light yellow transparent liquid, no mechanical impurities Ocular Estimate Density(25℃,g/cm3) 0.85~1.00 GB/T 4472-2011...


Product Detail

Product Tags

Related Video

Feedback (2)

All we do is always associated with our tenet " Customer first, Trust first, devoting on the food packaging and environmental protection for P-50 , PCB Cleaning , OF-02A , Our tenet is "Reasonable prices, efficient production time and best service" We hope to cooperate with more customers for mutual development and benefits.
2017 Good Quality Defoamer OF-02A Defoamer for Oil-Gas/Water Separation to Azerbaijan Importers Detail:

SIXIN® DEFOAMER OF-02A 

 

FEATURES

● SIXIN® OF-02A is composed of modified polysiloxane.

● Good stability.

● High efficient foam-suppressing performance.

● Good compatibility with petroleum solvent, can be diluted with solvents(such as    kerosene, dimethylbenzene ).

 

TYPICAL PROPERTIES

Index

Property

Testing method

Appearance

 Colorless or light yellow transparent liquid, no mechanical impurities

Ocular Estimate

Density(25℃g/cm3)

0.851.00

GB/T 4472-2011

Viscosity(mPa·s25℃)

10250

GB/T 5561-2012

NoteAll above is only for reference and shall not be deemed as technical indicator.

 

APPLICATIONS

● Oil industry (crude oil transportation, air/oil separation,oil-water separation,delayed coking and oil refining process ).

 

PACKAGE

50/200kgs plastic drum/IBC

 

SHELF LIFE

24 months from the date of manufacture.

 

TIPS

Antifoam Oilfield,Antifoam Refinery


Product detail pictures:

2017 Good Quality
 Defoamer OF-02A Defoamer for Oil-Gas/Water Separation to Azerbaijan Importers detail pictures


Related Product Guide:

Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for 2017 Good Quality Defoamer OF-02A Defoamer for Oil-Gas/Water Separation to Azerbaijan Importers, The product will supply to all over the world, such as: Iceland , Ghana , Pakistan , Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs. We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!


  • This is a first-generation 1992 1.6L Hyundai Elantra small-combustion-chamber head. Thats what it is. It’s a J1 Elantra cylinder head. Good luck finding another one like it. (read more)…

    In Cylinder Head 106 I talked about the mainstream porting theories as they are discussed. We looked at a cylinder head that I have thousands of dollars of professional work performed on, and a bone-stock second-generation head that I didn’t port.

    In this video I just might do something you haven’t seen done before. For some, that may be uncomfortable. The port and polish job I perform here is what I think will work best for my current build. This is not an extreme killer port job. What will be different here is where port textures are concerned, I will be following the advice of a reputable source that will remain un-named. You’re free to port yours differently than I do in this video, and I give you that out, around the 20 minute marker.

    The Hyundai is far from being an ultimate-performance build. It’s a $400 box of scraps with nothing but time invested. It’s perfect for this video. My finished product WILL be an improvement over what I had. I don’t yet have access to a flow bench. I still have an achievement to un-lock. As far as you should be concerned with the techniques I employ… without flow numbers there is no evidence of what this will do, but we will gather lots of info from dynp sessions and drag strip time slips. If I could test it on a flow bench, I would.

    There are MANY, and when I say many, I mean thousands of flame war mongering pirates floating around on rough seas with a hair trigger cannon finger itching to fire if you port a head any differently than what the herd mentality says to do while porting a cylinder head. I cover the herd mentality because it has merit. It’s been tested. Tried and true. But I don’t follow it to the letter of the law. I’m definitely not here to de-bunk it. I would port a cylinder head differently for each build based on how that engine was used. There’s an extremely valid reason why relating to air speed. It’s not the texture of a port that maximizes the effect of fuel atomization, but the velocity of the air running through an x or y sized valve. The driving factor in this is the piston speed. I’m not going to give you the technical information, but will refer you to information about the Lovell factor. There’s a better description of this in the links below, and even a calculator to help you find your engine’s sweet spot.

    Why the Lovell factor is important:

    https://www.highpowermedia.com/blog/3346/the-effect-of-valve-size

    Lovell gas factor calculator:

    http://www.rbracing-rsr.com/lovellgascalc.html

    Only people who have flow testing equipment know for sure what really works and have the capability to produce a perfectly-matched port job for the ultimate performance build. Those guys know the definition of ultimate, and THEY are floating below the water Aegis-class submarines ready to blow your comment up if you don’t know what you’re talking about. They don’t care if you’re an armchair mechanic or a herd of pirates. I will say, they’re zoomed in pretty close on me right now, and I’m expecting to take a few hits. My work will be tested based on dyno and drag strip performance, and the results will be posted here. Fortunately, those kinds of videos are a WHOLE LOT EASIER TO MAKE!!!



    Untuk Pemesanan Silahkan Hubungi Kontak Kami :
    Tsel : 082334611168
    WA : 085790327512
    Pin BB : 5ABC736F
    Email : lestariayu100974@gmail.com

    http://icepackblueice.com/

    Alamat : Jln. Wilis No. 44 Kel. Torongrejo Kec. Junrejo Batu – Malang

    usaha es krim rumahan,
    usaha es krim,
    bisnis es krim rumahan,
    jual paket usaha ice cream,
    bisnis es krim cone,
    peluang usaha es krim diamond,
    memulai usaha es krim,
    bisnis es krim walls,


    5 Stars By from Jamaica -

    5 Stars By from Bolivia -

    Related Products