factory customized Defoamer WT-9C Antifoam, Defoamer for water treatment Supply to Uzbekistan
SIXIN® DEFOAMER WT-9C FEATURES ● Composed of polyether. ● Stable during storage. ● Excellent antifoaming performance. ● Better alkali-resistance and acid-resistance at a wide pH range(3.0-12.0). TYPICAL PROPERTIES Test Result Test method Appearance colorless to light yellow liquid at room temperature，no any impurities GB/T26527-2011 Viscosity （25℃，mPa·s） 400-1000 GB/T 5561-2012 Water Solubility Dispersible in water 1% in water Note：All above ...
factory customized Defoamer WT-9C Antifoam, Defoamer for water treatment Supply to Uzbekistan Detail:
SIXIN® DEFOAMER WT-9C
● Composed of polyether.
● Stable during storage.
● Excellent antifoaming performance.
● Better alkali-resistance and acid-resistance at a wide pH range(3.0-12.0).
colorless to light yellow liquid at room temperature，no any impurities
Dispersible in water
1% in water
|Note：All above is only for reference and shall not be deemed as technical indicator.|
● Food process and fermentation.
● Fiber cement board.
● Water treatment(sewage and desalination of the sea water).
● Wafer cutting fluid.
50/200kgs plastic drum/IBC
12 months from the date of manufacture.
Defoamer Food,Antifoam Food,Defoamer Fermentation,Antifoam Fermentation
Defoamer Water Treatment,Antifoam Water Treatment
Product detail pictures:
Related Product Guide:
With reliable quality process, good reputation and perfect customer service, the series of products produced by our company are exported to many countries and regions for factory customized Defoamer WT-9C Antifoam, Defoamer for water treatment Supply to Uzbekistan, The product will supply to all over the world, such as: French , Honduras , Portugal , Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .
Hi, I’m Joe from webbsonline and today we’re going to discuss pond foaming.
If you’re seeing a bubbling or foaming on the surface of the pond, more often at the base of your waterfall-this generally means there’s an excess of proteins or dissolved organics in the water. These are a completely normal part of the biological process and a common occurrence in the spring when the pond balance has not yet been established. Their origin stems from a few areas-
Primarily, the fish and fish food.
A quick solution is to use a defoaming product, however this does not address the underlying issue.
A few steps to reduce the dissolved organic load are:
1. Ensure adequate filtration is present.
2. Make sure you don’t have too many fish for your pond size.
3. Don’t overfeed. Only feed them what they can eat in 5 min. Uneaten food will add to the organic load, same with fish waste.
4. Use beneficial bacterial such as Microbe Lift PL. This will help breakdown organics.
6. Partial water changes can help as well.
For additional information on foam and dissolved organics, please don’t hesitate to call. I’m Joe from webbsonline, talk to you then.
By from Italy -
By from Plymouth -