Factory wholesale Defoamer P-50 Defoamer for Cork wood Pulp Making, Industrial Sewage to Sri Lanka Factories
SIXIN® DEFOAMER P-50 FEATURES ● Composed of polysiloxane, modified polysiloxane, silicon resin, silica,dispersing agent, and stabilizing agent. ● Stable effects in strong alkaline (pH 10.0-14.0) and moderate-high temperature (60℃-90℃). ● Imemediate foam control action. ● Persistent foam control action. TYPICAL PROPERTIES Index Result Test method Appearance White or yellowish uniform liquid emulsion, without any sediment and mechanical impurities GB/T26527-2011 ...
Factory wholesale Defoamer P-50 Defoamer for Cork wood Pulp Making, Industrial Sewage to Sri Lanka Factories Detail:
SIXIN® DEFOAMER P-50
● Composed of polysiloxane, modified polysiloxane, silicon resin, silica,dispersing agent, and stabilizing agent.
● Stable effects in strong alkaline (pH 10.0-14.0) and moderate-high temperature (60℃-90℃).
● Imemediate foam control action.
● Persistent foam control action.
White or yellowish uniform liquid emulsion, without any sediment and mechanical impurities
|Note：The information above is for reference and shall not be deemed as a technical indicator. Test pH with indicator paper (pH 5.5 to 9); pH values cannot be tested by other methods.|
● Pulp making.
● Pretreatment of textile (desizing, scouring, and bleaching)
● Textile dyeing (cotton dyeing)
● Acrylic size
● Industrial cleaning
● Sewage treatment
50/200kgs plastic drum/IBC
9 months from the date of manufacture.
Defoamer Pulp,Defoamer Pulp Mill,Defoamer Pulp Making,Defoam,
Product detail pictures:
Related Product Guide:
Every member from our high efficiency sales team values customers' needs and business communication for Factory wholesale Defoamer P-50 Defoamer for Cork wood Pulp Making, Industrial Sewage to Sri Lanka Factories, The product will supply to all over the world, such as: Congo , Tunisia , Algeria , To acquire a consistent, profitable, and constant growth by getting a competitive advantage, and by continuously increasing the value added to our shareholders and our employee.
Grand Slam is 3D Products heavy degreaser. Grand Slam is a heavy degreaser diluted from 4:1 to 10:1.
On your engines you usually are using only 4:1. So it makes it very easy for you to clean up any the dirty greasy grime that’s left in an engine before you get to the final detailing stages but be nice and thorough make sure you get into the nooks and crannies any places that grease might be settling don’t let it sit for anything longer than two minutes and if you have to in any hard-to-reach areas
You can slightly agitate with a tree brush. Try not to yank around too much on stuff inside you don’t want to loosen up any wires we are detailers not mechanics. Take your blaster, always wear goggles. Watch as the chemical takes away a lot of the dirt, the grease, and the grime; instead of you having to use tools or a pressure washer. Now, as you cut through the grease, take your 3D waterless product
give it a quick rinse down to bring a little bit of shine to all the plastics as well, so it will dress it. It has advanced polymers in there they’re gonna help lift up all the dirt and give you a nice good shine be very careful when you’re digging inside an engine because there are a lot of sharp parts if you prefer wear gloves in the hard to reach places take your tree brush, wrap your towel in it.
This was a pretty dirty engine a lot more dirty than I thought. Now that we’ve taken and used these two products with an air blaster and just a couple of towels and not a single drop of water.
We can not only clean the engine but will also increase the value of the car and keep in mind, 3D Grand Slam not only can be useful on your car, it has other home applications such as cleaning your BBQ, cleaning your stovetop grill. Cleaning out some of the brake dust. It can be diluted a little bit less and can be diluted anywhere from four to 1; all the way to about fifteen to one if you’d like a strong enough to be used to clean up your engine.
Non Silicone Dressing is part of 3D Products Body Shop line. It is Body Shop safe because it does not have silicone in it. It works beautifully on trim, vinyl, molding, bumpers, tires and on your engine. This dressing will give you a great shine while not contaminating your body shop with particles that could mess up your next paint booth job. It is also VOC compliant . Product number 713.
McDonald’s have released the Cheeseburger Shaker Fries, are they any good? Do they taste like a cheeseburger? We find out in this review.
CHEESEBURGER FLAVOURED SEASONING: Salt, Cheese Powder [Cheese Solids (Milk, Salt, Starter Culture, Enzymes), Milk Solids, Salt, Food Acid (270), Hydrolysed Vegetable Protein], Maltodextrin, Dextrose, Tomato Powder, Flavours, Vegetable Powders, Yeast Extracts, Anticaking Agent (551), Mustard Flour, Acidity Regulator (262), Vegetable Oil, Spice.
FRIES: Potato, Canola Oil, Mineral Salt (450), Dextrose, Antifoam (1521). OR
Potatoes, Canola Oil (Antioxidant 307) Dextrose, Mineral Salt (450), Antifoam (Secondary Fatty Alcohol, Ethoxylated and Propoxylated).
Contains milk. Traces of sulphites in seasoning
FRIES are cooked in vegetable oil blend.
By from Cancun -
By from Azerbaijan -