High Performance Defoamer WT-9C Antifoam, Defoamer for water treatment to Mexico Manufacturers
SIXIN® DEFOAMER WT-9C FEATURES ● Composed of polyether. ● Stable during storage. ● Excellent antifoaming performance. ● Better alkali-resistance and acid-resistance at a wide pH range(3.0-12.0). TYPICAL PROPERTIES Test Result Test method Appearance colorless to light yellow liquid at room temperature，no any impurities GB/T26527-2011 Viscosity （25℃，mPa·s） 400-1000 GB/T 5561-2012 Water Solubility Dispersible in water 1% in water Note：All above ...
High Performance Defoamer WT-9C Antifoam, Defoamer for water treatment to Mexico Manufacturers Detail:
SIXIN® DEFOAMER WT-9C
● Composed of polyether.
● Stable during storage.
● Excellent antifoaming performance.
● Better alkali-resistance and acid-resistance at a wide pH range(3.0-12.0).
colorless to light yellow liquid at room temperature，no any impurities
Dispersible in water
1% in water
|Note：All above is only for reference and shall not be deemed as technical indicator.|
● Food process and fermentation.
● Fiber cement board.
● Water treatment(sewage and desalination of the sea water).
● Wafer cutting fluid.
50/200kgs plastic drum/IBC
12 months from the date of manufacture.
Defoamer Food,Antifoam Food,Defoamer Fermentation,Antifoam Fermentation
Defoamer Water Treatment,Antifoam Water Treatment
Product detail pictures:
Related Product Guide:
We have the most advanced production equipment, experienced and qualified engineers and workers, recognized quality control systems and a friendly professional sales team pre/after-sales support for High Performance Defoamer WT-9C Antifoam, Defoamer for water treatment to Mexico Manufacturers, The product will supply to all over the world, such as: Casablanca , Johannesburg , Puerto Rico , In addition, we would properly guide the customers about the application techniques to adopt our products and the way to select appropriate materials.
Yellow Jet 758 Grams with remaining Coroplast 2 X 7.4 V 1300 mAh batteries Arduino Nano RX Xbee with antenna, servos and misc hardware. Chamfered the top on the leading edges. All control surfaces cut and hinged. ESC mounted
See the controller flying http://www.youtube.com/watch?v=-LRjqKqUy8s&hd=1
Lots of Jets http://www.rcgroups.com/forums/thumbgallery.php?do=showattach&u=151599&page=5
Space 1 Jet builder On RCgroups http://www.rcgroups.com/forums/member.php?u=151599
On 14.8 Volts its pushing almost 500 Grams, not so bad thrust mapping is as follows.
100 Grams 1.9 A 27.6 Watts
156 Grams 3.0 A 42.9 Watts
197 Grams 3.9 A 55.1 Watts
257 Grams 5.5 A 76.0 Watts
296 Grams 6.7 A 90.9 Watts
340 Grams 7.9 A 105.5 Watts
432 Grams 10.7 A 138.1 Watts
492 Grams 12.5 A 155.7 Watts
1. EPS Foaming-Cup Production Line is widely applied in producing large amount of hot coffee cup, hot tea cup, hot soup blow, noodle tub and other food and beverage packing .
2. Light weight, good rigidity and well heat isolation.
3. The machine holds many merits such as high foaming times, high producing efficiency, low steam consumption, low cost and different model products are made at same time.
4. Pipes and tubes of the transferring system are all made from stainless material so that they resist eroding and easy to be cleaned.
5. Pre-expand and forming procedures are all operated by automatic controller, the mechanical and electrical device or apparatuses are all from international famous brand.
By from Pakistan -
By from Florence -