OEM Customized Defoamer TEX-30T Defoamer, Antifoam for Textile Export to Israel
SIXIN® DEFOAMER TEX-30T FEATURES ● Composed of polysiloxane, modified polysiloxane, silica, dispersing agent, and stabilizing agent. ● Excellent inhibiting foam performance in the medium and high temperature dyeing(60℃-130℃). ● Stable in alkaline environments (pH 8-11). TYPICAL PROPERTIES Index Result Test method Appearance White or yellowish uniform liquid emulsion, without any sediment nor mechanical impurities GB/T 26527-2011 pH 6.5～8.5 Nonvolatile ...
OEM Customized Defoamer TEX-30T Defoamer, Antifoam for Textile Export to Israel Detail:
SIXIN® DEFOAMER TEX-30T
● Composed of polysiloxane, modified polysiloxane, silica, dispersing agent, and stabilizing agent.
● Excellent inhibiting foam performance in the medium and high temperature dyeing(60℃-130℃).
● Stable in alkaline environments (pH 8-11).
White or yellowish uniform liquid emulsion, without any sediment nor mechanical impurities
|Note：The information above is for reference and shall not be deemed as a technical indicator. Test pH with indicator paper (pH 5.5 to 9); pH values cannot be tested by other methods.|
● Textile dyeing(cotton, polyester).
50/200kgs plastic drum/IBC
9 months from the date of manufacture.
Antifoam Textile,Antifoam Dyeing,Silicone Defoamer,Water Base Defoamer,
Silicone Antifoam,Water Base Antifoam
Product detail pictures:
Related Product Guide:
Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for OEM Customized Defoamer TEX-30T Defoamer, Antifoam for Textile Export to Israel, The product will supply to all over the world, such as: Angola , Malta , Curacao , By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.
Contactor: Ms. Doris Cheng
Phone: +86 15244532382
Company:Longkou Fushi Packing Machinery Co., LTD
PS foam sheet machine：PS granule melted by heating，injected foaming agent， after mixing， PS foam sheet extruded through the mold then winding，
Fully Automatic mechanical arm vacuum forming machine：PS foam sheet is heated to soften，pressed into lunch boxes by the mold，then punching the hole needed in the lunch boxes，at the same time lunch boxes and edge material is cut to only a few connection points to connect，then finished goods and edge material separated by the stacking collection system，finished goods are stacking collection and transport out by conveying belt，waste scrap broken.
Granulator：Broken scrap recycling，produce into granule in order to re-use，reduce production costs.
If you are interested in our machine,please feel free to contat us.
Casting Quickies: FlexFoam-iT! X Concrete Block
Preparing the Mold
Sonite Wax must be applied to the lid of the mold box. Sonite Wax precents FlexFoam-iT from sticking to the melamine board. Mann Ease Release 2831 is applied to the Mold Max silicone mold. Using release agent extends the life of the silicone mold. Reassemble the mold box. Mold straps must be used to prevent blowout.
Casting FlexFoam-iT! X Expanding Urethane Foam
Dispense equal parts A & B. SO-Strong color tints are added. Black, White & Green tints are added to Part B. Part B is premixed with the tint. Premixing ensures uniform color distribution. Part A is added and mixed thoroughly. The foam is poured into the vent holes. FlexFoam-iT! X expands 6x in volume. Excess foam will rise through vent holes. Allow FlexFoam-iT! X to cure for 2 hours. Trim away excess foam. Disassemble the mold box. Carefully peel back the mold rubber. Slowly remove the foam block. Trim excess flashing with a razor knife. Baby Powder is sprinkled on the surface. This enhances the chalky look of the block. The finished FlexFoam-iT! block is flexible and very durable.
Make It Now! with Smooth-On
By from Malaysia -
By from Austria -