Wholesale Discount Defoamer OF-02A Defoamer for Oil-Gas/Water Separation for Cairo Manufacturers
SIXIN® DEFOAMER OF-02A FEATURES ● SIXIN® OF-02A is composed of modified polysiloxane. ● Good stability. ● High efficient foam-suppressing performance. ● Good compatibility with petroleum solvent, can be diluted with solvents(such as kerosene, dimethylbenzene ). TYPICAL PROPERTIES Index Property Testing method Appearance Colorless or light yellow transparent liquid, no mechanical impurities Ocular Estimate Density(25℃，g/cm3) 0.85～1.00 GB/T 4472-2011...
Wholesale Discount Defoamer OF-02A Defoamer for Oil-Gas/Water Separation for Cairo Manufacturers Detail:
SIXIN® DEFOAMER OF-02A
● SIXIN® OF-02A is composed of modified polysiloxane.
● Good stability.
● High efficient foam-suppressing performance.
● Good compatibility with petroleum solvent, can be diluted with solvents(such as kerosene, dimethylbenzene ).
Colorless or light yellow transparent liquid, no mechanical impurities
|Note：All above is only for reference and shall not be deemed as technical indicator.|
● Oil industry (crude oil transportation, air/oil separation,oil-water separation,delayed coking and oil refining process ).
50/200kgs plastic drum/IBC
24 months from the date of manufacture.
Antifoam Oilfield,Antifoam Refinery
Product detail pictures:
Related Product Guide:
Adhering to the principle of "quality, service, efficiency and growth", we have gained trusts and praises from domestic and international client for Wholesale Discount Defoamer OF-02A Defoamer for Oil-Gas/Water Separation for Cairo Manufacturers, The product will supply to all over the world, such as: Amman, Slovak Republic , Latvia , Since its foundation , the company keeps living up to the belief of "honest selling , best quality , people-orientation and benefits to customers. " We are doing everything to offer our customers with best services and best products . We promise that we'll be responsible all the way to the end once our services begin.
Learn how a partnership approach, combined with Water & Process Technologies’ chemical and equipment solutions, has helped BASF TOTAL Petrochemicals in Port Arthur, Texas, improve operations and prevent unplanned downtime.
In this video we show How to replace the oxygen (O2) sensor also known has Air Fuel Ratio sensor on the Nissan Frontier V6 (3300 – VG33E) engine.Here you will see the difference between Bank #1 (right side)and Bank #2(left side) heated (4-wire) oxygen sensors. Replacing the oxygen sensor every 60-70,000 miles is an effort to help conserve fuel/gasoline.The oxygen sensor are not the only device to harness against waste consumption. The coolant temperature sensor at the thermostat housing reports to the computer, the computer commands the cooling fans through the fuel/relay box. Some model will be equipped with dual cooling fans. One for normal operation is the 1st fan. The 2nd fan is for air condition operation and over-heating conditions. If the Tstat remain stuck “close” the two fan will operate and coolant will overflow in its reserve container. The Tstat ONLY control engine temperature. The fans operation and gauge help radiates any heat or over heating base on ambient air temperature and operator.
The oxygen sensor is a state EPA “enviromental term” all so known has a EGT – exhaust gas temperature sensor sends millivoltage(data) to the ecm – engine control module for fuel injector control and its flow rate(impedeance). The oxygen sensor key roll is to measure the combustion flame/temperature .the ideal temperature for anything above 75% throttle is .870mv – .900mv output at the exhaust gas temperature/oxygen sensor. The oxygen(o2) sensor also work in conjuction with the Mass Air Flow Meter/sensor for fuel injector control. So the oxygen sensor can also be conside a Air Fuel Ratio sensor and the Mass Air Flow meter is mounted on the intake manifold duct.
M18 sensors – Install finger tight then 1/2 – 3/4 turn with wrench/ O2 sensor socket.26-33ft. lbs
M12 sensors – Install finger tight then 3/4 – 1 turn with wrench / O2 sensor socket.13.2-17ft. lbs.
APPLICATION: 2003 NISSAN FRONTIER EX, Xterra
3300 CC ENGINE 4X4
PLEASE – RATE – COMMENT AND SUBSCRIBE.
* DO NOT drop or use an oxygen sensor that has been dropped as this may have caused shock damage to the ceramic cell.
* DO NOT use any compound on or around the sensor unless labeled as oxygen sensor friendly products.
* DO NOT use impact wrench or conventional socket type wrench to install sensor.
* DO NOT allow sensor or lead wire to touch exhaust manifold or any other hot component.
* DO NOT expose this product to water,oil,windshield cleaner, anti-corrosion oil,grease,terminal cleaner, etc.
* DO NOT use leaded fuels, silicone or metal based additives
* DO NOT store under high humidity conditions will promote rusting.
WARNING : Anti-seize compound may cause irritation to the skin or eyes. In case of contact, wash affected area with soap and water. In case of eye contact, Flush with water for 15 minutes. If irritation persists, consult a physician. If swallowed, DO NOT induce vomiting.
KEEP OUT OF REACH OF CHILDREN.
By from Turin -
By from Comoros -